Call 08046078699 89% Response Rate

Send Email

GFE

We are a leading Wholesale Trader of valkyrie as addressable sounder strobe beacon, single loop addressable fire alarm panel, addressable manual call point, conventional heat detector, conventional smoke detector. and 3 loop addressable fire alarm panel from Navi Mumbai, India.
Valkyrie AS Addressable Sounder Strobe Beacon
  • Valkyrie AS Addressable Sounder Strobe Beacon
  • Valkyrie AS Addressable Sounder Strobe Beacon
  • Valkyrie AS Addressable Sounder Strobe Beacon

Valkyrie AS Addressable Sounder Strobe Beacon

Product Price: Rs 5,150 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationOffices
MaterialABS
Body MaterialPlastic
ColorRed
Model Name/NumberValkyrie AS

We are engaged in offering Valkyrie AS Addressable Sounder Strobe Beacon to our clients. Our range of all products is widely appreciated by our clients.

Addressable Wall Mounted Sounder.

Get Best QuoteRequest A Callback
Single loop Addressable Fire Alarm Panel
  • Single loop Addressable Fire Alarm Panel
  • Single loop Addressable Fire Alarm Panel
  • Single loop Addressable Fire Alarm Panel

Single loop Addressable Fire Alarm Panel

Product Price: Rs 54,470 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationCommercial
Body MaterialPlastic
Product TypeAddressable Fire Alarm Panel
BrandGFE
Model Name/NumberG-One
ColorWhite (RAL 9003) or Red (RAL 3001)
We are engaged in offering G-One Loop Panel to our clients. Our range of all products is widely appreciated by our clients.

Single Loop EN54 Fire Alarm Control Panel
Get Best QuoteRequest A Callback
Addressable Manual Call Point
  • Addressable Manual Call Point
  • Addressable Manual Call Point
  • Addressable Manual Call Point

Addressable Manual Call Point

Product Price: Rs 2,995 / PieceGet Best Price

Product Brochure

Product Details:
MaterialABS Plastic
Usage/ApplicationFire Alarm System
Model Name/NumberGFE-MCPE-A
Dimensions MmSurface Mounted 92.6 (H) x 92.6 (W) x 60.1 (D) mm
Relay OutputsAlarm Relay
ColorRed
Weight152g Includes back box and fixings
The GFE-MCPE-A is an Analogue Addressable Manual Call Point, designed and manufactured to comply with EN54-11, compatible with all GFE Addressable Control panels.
Get Best QuoteRequest A Callback
Conventional Heat Detector
  • Conventional Heat Detector
  • Conventional Heat Detector
  • Conventional Heat Detector
  • Conventional Heat Detector

Conventional Heat Detector

Product Price: Rs 755 / PieceGet Best Price

Product Brochure

Product Details:
Startup Time (sec)10 sec
Operating Temperature-10 DegreeC to 50 DegreeC
System ComponentsHeat detector
TypeConventional
Model Name/NumberZEOS-C-H
Automation GradeAutomatic
ColorWhite
Body MaterialPlastic
- Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.

- Heat detectors generally detect the heat that comes as a result of combustion.

- The devices trigger an alarm when they sense a rapid rise in temperature or when a certain temperature is reached.

Features:

Heat detectors are vital devices for detecting fires and ensuring safety.

As the name suggests, the devices sense the temperature of a room or area in order to detect fires.

Heat detectors work on a similar principle used by smoke detectors, by tracking the temperature instead of smoke.


Get the best price for Fire Alarm Heat Detector
Get Best QuoteRequest A Callback
Conventional Smoke Detector.
  • Conventional Smoke Detector.
  • Conventional Smoke Detector.
  • Conventional Smoke Detector.

Conventional Smoke Detector.

Product Price: Rs 600 / PieceGet Best Price

Product Brochure

Product Details:
Alarm Sensor TypePhotoelectric
BrandGFE
Usage/ApplicationIndustrial
Product TypeConventional
Power SourceElectric
ColorWhite
Automation GradeAutomatic
Voltage10-30 V DC
Conventional Smoke detector with Base

TheZEOS-CseriesofFireAlarmDetectorshasbeendesignedtobeexclusivelycompatiblewiththeGlobalFireEquipment range of conventional detection zones available in the following equipment  Conventional Panels:   ORION, ORION MINI, ORION EX and ORION-PLUS  Addressable Zone Monitoring Units:  QUAD-ZMU and ZM U

Get best price for Photoelectric GFE_ZEOS-C-S, For Industrial
Get Best QuoteRequest A Callback
3 Loop  Addressable Fire Alarm Panel
  • 3 Loop  Addressable Fire Alarm Panel
  • 3 Loop  Addressable Fire Alarm Panel
  • 3 Loop  Addressable Fire Alarm Panel

3 Loop Addressable Fire Alarm Panel

Product Price: Rs 1.23 Lakh / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
Product TypeAddressable Fire Alarm Panel
BrandGFE
Model Name/NumberOcto + 3 Loop
Power90V AC to 230V AC
ColorWhite (RAL 9003) or Red (RAL 3001)
We are engaged in offering GFE Addressable Fire Alarm Panel to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

  • Delivery Time: 3-4 weeks
Get Best QuoteRequest A Callback
Two Loop Addressable Fire Alarm Panel
  • Two Loop Addressable Fire Alarm Panel
  • Two Loop Addressable Fire Alarm Panel

Two Loop Addressable Fire Alarm Panel

Product Price: Rs 72,700 / PieceGet Best Price

Product Brochure

Product Details:
Usage/ApplicationIndustrial
TypeAutomatic
BrandGFE
System ComponentsFire Alarm Control Panel
Model Name/NumberGEKKO-2L
ColorWhite
We are engaged in offering GEKKO-2L Fire Alarm Control Panel to our clients. Our range of all products is widely appreciated by our clients.

Analogue Addressable Control Panel
Get Best QuoteRequest A Callback
Analogue Addressable Control Panel
  • Analogue Addressable Control Panel
  • Analogue Addressable Control Panel

Analogue Addressable Control Panel

Product Price: Rs 57,580 / PieceGet Best Price

Product Brochure

Product Details:
Product TypeAddressable Fire Alarm Panel
BrandGFE
Model Name/NumberGEKKO 2L
Weight1.6 Kg - 7 Kg
Stand By Batteries2 x 12 V 7 AH
Loops1 to 4 loops - Max 150 mA per loop
ColorRed
Key Features:

- 1 to 4 loops panel networkable panel, compatible with OCTO+ and NODE+ range of panels.

- Supports connection to Repeaters via RS422, Fibre-Optic or TCP/IP 250 devices per loop (125 address limit Up to 95 VULCAN 2 (addressable) ultra low current base sounders (32 address limit 32 individually programmable sounder addresses.

- Full Self-Addressable devices support 2 Fire output relays (change-over) and 1 fault relay (NC - opens on fault 2 conventional alarm outputs (individually programmable oth detection loops monitored for integrity 384 fully programmable zones 512 fully programmable sounder groups 512 I/O groups.

- Event log (rolling, 10000 entries available only with ZEOS protocol compatible with all our own low cost ancillary modules.

- Backlit graphical LCD display of 240x64 pixels  programming by integrated keypad or loader PC software multiple language support (menu selectable Integrated 16 zone LED fire zone indication)
Get Best QuoteRequest A Callback
Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector
  • Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector
  • Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector
  • Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector

Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector

Get Latest Price

Product Brochure

Product Details:
ColorRed and White
Model Name/NumberGFE-SWR-IR3
BrandGlobal Fire
Current In Alarm (24 V Dc)+/- 75 mA at 24 VDC
(Optional) GFE-SWR-BKT MateriaPA66, 316SS nuts and bolts
(Optional) GFE-SWR-BKT Weight280 g
Power12-24 Vdc (10-28 VDC)
Current Normal25 mA at 24 VDC
Alarm Response Time< 8 sec
Pressure Compensating ElementPCE (Pressure Compensating Element) avoids moisture build up in the detector housing, caused by pres
Relay Outputs/Alarm RelayDe-energized during normal operation, no alarm, SPDT, 30 Vdc - 2 A, 60 W max.
Alarm Output SettingSelectable LEDs And Relays Latching/Non Latching
Relay Output/Fault RelayEnergized during normal operation, no fault, SPDT, 30 Vdc - 2 A, 60 W max.
Dimensions125 x 80 x 57 mm
Cable GlandM20 (cable conduit diameter 5.5-13 mm, two steps 5.5-8 mm and 8-13 mm)
Detection RangeGFE-SWR-UV & GFE-SWR-UVIR: 17 m (n-heptane; 33x33 cm); 25m (alcohol; 50x50 cm) GFE-SWR-IR3: 35 m (n-
Ingress ProtectionIP65
Current OutputStandard available 0-20 mA (stepped, sinking, non-isolated)
Cone Of Vision90 minimum
Startup Time<10 sec
Weight465 g
Automatic And Manual Self TestAutomatic Sensor Test (Built in Self-Test) and manual self-test
HousingGlass Reinforced Polyester (GRP), Lid screw tightening torque 2 nm minimum

GFE announces the addition of flame detectors to our range, providing an additional high quality and competitive solution to our customers.

This new range has 3 models covering UV and IR wavelengths, namely UV, triple IR and combined UV/IR detection. With CPR and ATEX certification it will be a good option for the majority of scenarios here flame detection technology is required. 

GFE-SWR-IR3 flame detector must exceed its alarm threshold to initiate a fire alarm. The GFE-SWR-IR3 flamedetector also use additional alarm criterion: the analysis of the flame flicker-frequency. This version also exhibits good false alarm rejection capabilities.

GFE-SWR Flame Detectors GFE-SWR flame detector range utilizes a microprocessor for sophisticated electronic signal analysis. Its advanced discrimination technology and rugged construction makes it suitable for almost all installations scenarios as it's presented in application table below. GFE-SWR-UVflame detector is suitable for indoor applications, such as fume hoods and hydrogen storages. Because of its non-corrosive housing it is suitable for indoor industrial areas where corrosion may occur. UV light is emitted in practically every fire, both hydrocarbon and non-hydrocarbon fires. GFE-SWR-UVIR flame detector is a combination of UV and IR detections, it uses an additional alarm criterion: the analysis of the flame flicker frequency. The UV and IR sensor must both exceed their alarm threshold to initiate a fire alarm. The GFE-SWR-UVIR flame detector has a good false alarms immunity since the UV and IR sensor do not share false alarm sources. GFE-SWR-IR3 flame detector must exceed its alarm threshold to initiate a fire alarm. The GFE-SWR-IR3 flame detector also use additional alarm criterion: the analysis of the flame flicker-frequency. This version also exhibits good false alarm rejection capabilities.

Key Features: 

  • Suitable for heavy and light Hydrocarbons such as Gasoline, Diesel, Methanol and Ethanol 
  • Resistant to artificial and sunlight
  • Suitable for indoor and outdoor applications
  • GRP IP65 housing
  • Relay output for Alarm and Fault conditions
  • CPR/EN54-10 certified
  • ATEX zone 2/22 certified
  • FM3260 & 3611 Approvals
  • Rugged sensors make the detector suitable for virtually all fire types
  • Sophisticated software enhances the reliability and availability of the detector
  • Design of the housing and the swivel mount avoid mounting errors with regards to grounding
  • Automatic Sensor Test (Built-in Self-Test) enhances the reliability and availability of the flame detector
  • Pressure Compensating Element avoids additional cost of maintenance caused by moisture build up and increases the life time. 
Get Best QuoteRequest A Callback
Orion Extinguishing Panel

Orion Extinguishing Panel

Product Price: Rs 25,000 / PieceGet Best Price

Product Brochure

Product Details:
BrandOrion
Weight1.7 Kg - 7 Kg (inc. 2 x 7 AH 12 V bat.)
Evacuation And ResetNon-Latching - Voltage free contact
Model No.ORION EX
End Of Line MonitoringActive EOL - 10uF/50V Bipolar Electrolytic Aluminium Capacitor
Fully Monitored InputsRemote Activation, Remote Abort, Electrovalve Status, Flow/Pressure Switch Status
Voltage Output27.5 V DC Nominal
ProtectionIP30
Secondary Supply Current Output1.85 Amp Maximum @ 20 C
Auxiliary Relay Output1 Fire (COM-NC-NO) - 1 Fault (COM-NC) non-supervised
Primary Supply Voltage230 +10% -15% V AC
Mains Fuse4 A -250 V Slow Blow - 20mm
Number Of Detection Zones3
Current Output1000 mA combined maximum current drive for both circuits
End Of Line Resistor10 K Ohms - 1/4 Watt
Battery Fuse1.85 Amp - Resettable
Secondary Supply Voltage21.0 min. - 27.2 max. V DC - BAT Charger o/p 28 V DC
ColourWhite or Red
Alarm Resistance Value270 - 1000 Ohms
Primary Supply Current Out1.7 A @ 28.5 V DC Nominal (max.)
BS5839 Detector Removal CompliantYES provided diodes are fitted to detector base
Max Humidity95% RH Non-Condensing
Relay Contact Rating30 V DC - 2 Amp Resistive Loads
Internal Battery Capacity Maximum2 x 12V x 7Ah Sealed VRLA Lead Acid Batteries
Zone Current Quiescent/ Alarm4 mA / 60 mA - Maximum
Max Cable Resistance Capacitance40 Ohms / 0.470 uF
Dimensions273 (L) x 107 (W) x 404 (H) mm
Devices Per Zone32 Maximum - EN54 pt.2
Primary Supply Voltage Out28.5 V DC Nominal
Key Features:

  • 3 fire detection zones, with zones 1 and 2 linked with extinguishing cycle
  • Up to 32 conventional smoke and/or heat detectors per zone
  • Active end of Line monitoring (10uF/50V bipolar capacitor) for zones
  • Programmable pre-release and extinguishing times
  • Remote manual activation and remote abort input
  • Electro valve and pressure switch status indication
  • One man test
  • Supervised auxiliary 24 volt supply output
  • 2 Supervised/monitored output circuits
  • 2 Remote inputs used for activation of evacuation and Reset
  • 2 Relay outputs fire and fault with status indication
  • Fully EN 54-2, EN54-4 and EN 12094-1 complian it

Orion Ex conventional fire detection & extinguishing panel the Orion Ex conventional fire detection and extinguishing panel offers a creatively designed and aesthetically pleasing solution to satisfy the growing world demand for dependable fire suppression systems. The Orion Ex is designed and manufactured to comply with EN54-2, EN54-4 and EN12094

1. The outstanding programmable features included in this panel are best suited to be installed in expensive housing areas and in general in all areas where loss of equipment can partially or totally disrupt the proper functioning of a business.

2. Operation is extremely intuitive, offering simple control and one-button disablement facilities, as well as the one man test mode which provides simple and efficient testing of the system.

3. Advanced configuration solutions include the following: programmable pre-release and extinguishing times, electrovalve and flow switch status indications, manual and abort remote activation.

4. There are 3 normal fire detection zones.

5. All inputs are fully monitored for both fire, activation and fault conditions.

6. Plans are under way to further complement this new range of extinguishing devices.

7. Devices such as repeater panels, addressable system interfaces, I/O expansion boards as well as manual/abort call buttons for remote connection are just some of the additions to this range.

Get Best QuoteRequest A Callback
Conventional Smoke Detector
  • Conventional Smoke Detector
  • Conventional Smoke Detector

Conventional Smoke Detector

Product Price: Rs 595 / PieceGet Best Price

Product Brochure

Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Krishjayna Consultants LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.