Call 08046078699 90% Response Rate

Send Email

Flame Detector

Providing you the best range of global fire gfe-swr-ir3 ex-proof 3 sensors ir flame detector and conventional flame detector with effective & timely delivery.
Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector
  • Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector
  • Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector
  • Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector

Global Fire GFE-SWR-IR3 Ex-Proof 3 Sensors IR Flame Detector

Product Price: Rs 1 Lakh / PieceGet Best Price

Product Brochure

Product Details:
ColorRed and White
Model Name/NumberGFE-SWR-IR3
BrandGlobal Fire
Current Normal25 mA at 24 VDC
Alarm Response Time< 8 sec
Weight465 g
Detection RangeGFE-SWR-UV & GFE-SWR-UVIR: 17 m (n-heptane; 33x33 cm); 25m (alcohol; 50x50 cm) GFE-SWR-IR3: 35 m (n-
Pressure Compensating ElementPCE (Pressure Compensating Element) avoids moisture build up in the detector housing, caused by pres
Automatic And Manual Self TestAutomatic Sensor Test (Built in Self-Test) and manual self-test
Relay Output/Fault RelayEnergized during normal operation, no fault, SPDT, 30 Vdc - 2 A, 60 W max.
(Optional) GFE-SWR-BKT MateriaPA66, 316SS nuts and bolts
Dimensions125 x 80 x 57 mm
Cone Of Vision90 minimum
Relay Outputs/Alarm RelayDe-energized during normal operation, no alarm, SPDT, 30 Vdc - 2 A, 60 W max.
Alarm Output SettingSelectable LEDs And Relays Latching/Non Latching
(Optional) GFE-SWR-BKT Weight280 g
Startup Time<10 sec
HousingGlass Reinforced Polyester (GRP), Lid screw tightening torque 2 nm minimum
Ingress ProtectionIP65
Current OutputStandard available 0-20 mA (stepped, sinking, non-isolated)
Power12-24 Vdc (10-28 VDC)
Cable GlandM20 (cable conduit diameter 5.5-13 mm, two steps 5.5-8 mm and 8-13 mm)
Current In Alarm (24 V Dc)+/- 75 mA at 24 VDC

GFE announces the addition of flame detectors to our range, providing an additional high quality and competitive solution to our customers.

This new range has 3 models covering UV and IR wavelengths, namely UV, triple IR and combined UV/IR detection. With CPR and ATEX certification it will be a good option for the majority of scenarios here flame detection technology is required. 

GFE-SWR-IR3 flame detector must exceed its alarm threshold to initiate a fire alarm. The GFE-SWR-IR3 flamedetector also use additional alarm criterion: the analysis of the flame flicker-frequency. This version also exhibits good false alarm rejection capabilities.

GFE-SWR Flame Detectors GFE-SWR flame detector range utilizes a microprocessor for sophisticated electronic signal analysis. Its advanced discrimination technology and rugged construction makes it suitable for almost all installations scenarios as it's presented in application table below. GFE-SWR-UVflame detector is suitable for indoor applications, such as fume hoods and hydrogen storages. Because of its non-corrosive housing it is suitable for indoor industrial areas where corrosion may occur. UV light is emitted in practically every fire, both hydrocarbon and non-hydrocarbon fires. GFE-SWR-UVIR flame detector is a combination of UV and IR detections, it uses an additional alarm criterion: the analysis of the flame flicker frequency. The UV and IR sensor must both exceed their alarm threshold to initiate a fire alarm. The GFE-SWR-UVIR flame detector has a good false alarms immunity since the UV and IR sensor do not share false alarm sources. GFE-SWR-IR3 flame detector must exceed its alarm threshold to initiate a fire alarm. The GFE-SWR-IR3 flame detector also use additional alarm criterion: the analysis of the flame flicker-frequency. This version also exhibits good false alarm rejection capabilities.

Key Features: 

  • Suitable for heavy and light Hydrocarbons such as Gasoline, Diesel, Methanol and Ethanol 
  • Resistant to artificial and sunlight
  • Suitable for indoor and outdoor applications
  • GRP IP65 housing
  • Relay output for Alarm and Fault conditions
  • CPR/EN54-10 certified
  • ATEX zone 2/22 certified
  • FM3260 & 3611 Approvals
  • Rugged sensors make the detector suitable for virtually all fire types
  • Sophisticated software enhances the reliability and availability of the detector
  • Design of the housing and the swivel mount avoid mounting errors with regards to grounding
  • Automatic Sensor Test (Built-in Self-Test) enhances the reliability and availability of the flame detector
  • Pressure Compensating Element avoids additional cost of maintenance caused by moisture build up and increases the life time. 
Get Best QuoteRequest A Callback
Conventional Flame Detector

Conventional Flame Detector

Product Price: Rs 30,000 / PieceGet Best Price

Product Brochure

Product Details:
CertificationEN54-5
Usage/ApplicationIndustrial Premises
BrandHochiki
Model Name/NumberDRD-E
Operating Voltage15 - 30 V dc
Alarm CurrentSurge current 320 micro A Minimum alarm trip current 6 mA
Ambient TemperatureOperating temperature range -10 DegreeC to +50 DegreeC
WeightWeight (g) / Dimensions (mm) 124 / 100 diameter x 37.3 height
Features  Class 1 performance as defined in BS EN54-10:2002 (range up to 25 m)  Single IR technology  Robust and slim design  Low current consumption  Easy to install  Fits any of the CDX Range of mounting bases  Twin LEDs for 360° view  Approved by LPCB & VdS
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Krishjayna Consultants LLP. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.